Burson Audio Timekeeper Voyager Flagship 200W Class-AB Mono-Block Power Amp with Class-A Operation & Performance

Price range: S$7,200.00 through S$8,600.00

📢 Pricings shown are for Credit Card payment. Contact us for Cash/PayNow/Bank transfer rate.

For a limited time, current pre-order promotion is even lower price! Contact us to find out.
🌟 HIGHLIGHTS
  • High-Current Monoblock Architecture – Dedicated monoblock amplification for each channel, eliminating shared stereo amplification and minimising cross-channel interference.
  • High-Bias Class-AB Design – Combines substantial Class-AB power delivery with high idle current, aiming for Class-A-like linearity and low-distortion performance.
  • 200W High-Current Output – Delivers 200W into 4Ω and 100W into 8Ω, designed to drive demanding loudspeakers from brands such as Dynaudio, B&W and KEF.
  • 480W GaN Fusion Core – Advanced Gallium Nitride power supply operating at 1MHz for high-current, low-noise power delivery.
  • Silent Power 2 Technology – Ultra-low 0.8µV noise floor, claimed to be 200 times quieter than standard voltage regulators.
  • Burson V7 Discrete Op-Amps – Proprietary discrete circuitry with a switchable Class-A input buffer for system matching.
  • Cool Case 2 Technology – Fanless thermal management designed to handle high idle power consumption without bulky conventional heatsinks.

Description

⚡ Amplifier Architecture
  • Fully discrete monoblock power amplifier.
  • High-current Class-AB topology (manufacturer’s page also describes Class-A operation; operating range requires confirmation).
  • One amplifier per channel.
  • Approximately 100W idle power consumption.
  • Designed for high linearity, dynamic range and loudspeaker control.
🔋 Power Supply Technology
  • GaN Fusion Core power supply.
  • 480W power delivery.
  • 1MHz switching frequency.
  • Silent Power 2 voltage regulation.
  • Claimed 0.8µV noise floor.
🎚️ Discrete Op-Amps
  • Burson V7 Vivid Pro discrete op-amps.
  • Switchable Class-A input buffer.
  • Selectable input buffer gain:
    • ON: +6dB RCA / +12dB XLR.
    • OFF: 0dB RCA / 0dB XLR.
  • Supports op-amp swapping.
🔌 Connectivity

Analogue inputs: 2

  • 1 × RCA single-ended.
  • 1 × XLR balanced.

Speaker outputs: 1 stereo speaker connection per monoblock

Two monoblocks are supplied for stereo operation.

📊 Technical Specifications
  • Output power: 100W @ 8Ω / 200W @ 4Ω.
  • Frequency response: 20Hz–20kHz.
  • THD: Less than 0.03% @ 1kHz.
  • Signal-to-noise ratio: 110dB.
  • Input impedance: 100kΩ RCA / 200kΩ XLR.
  • Output impedance: Less than 0.015Ω.
  • Gain: 29dB.
  • Idle power consumption: 100W.
  • Dimensions: 265 × 270 × 85mm.
  • Weight: Approximately 7kg per monoblock.
📦 Package Options
  • Standard: 2 × Timekeeper Voyager monoblocks, V7 Vivid Pro op-amps, Silent Power 02 modules and 32V/7A Super Charger.

  • Max: 2 × Timekeeper Voyager monoblocks, V7 Vivid Pro op-amps, Silent Power 02 modules and 2 × 32V/15A GaN Fusion Core power supplies.

Reviews

There are no reviews yet.

Be the first to review “Burson Audio Timekeeper Voyager Flagship 200W Class-AB Mono-Block Power Amp with Class-A Operation & Performance”

Your email address will not be published. Required fields are marked *