Description
🎧 Pure Class-A Amplifier Architecture
- Fully discrete, symmetrical dual-mono Class-A design.
- Deeper Class-A bias compared with the standard Soloist Voyager.
- High-performance MOSFET output transistors.
- No conventional volume control, preamplifier stage or display.
- Designed for use with DACs and streamers that have their own volume control.
- Separate power supplies for input and output amplification stages.
⚡ High-Power Class-A Amplification
- Up to 12W balanced XLR output at 32Ω.
- Up to 6W single-ended output at 32Ω.
- High-current output stage.
- Designed to drive demanding planar magnetic and high-impedance headphones.
- Three selectable gain settings:
- High: 20V / 14dB.
- Medium: 14V / 8dB.
- IEM: 6V / 3dB.
🔋 10 Max Current Power Supplies
- Two-layer internal architecture.
- 6 fully shielded MCPS modules in the upper section.
- 4 MCPS modules in the lower amplification section.
- Dedicated power delivery for the input buffer, IEM and headphone amplification stages.
- Mirror-symmetrical dual-mono circuit arrangement.
- Designed to minimise electromagnetic interference and cross-channel noise.
🎚️ Burson V7 Vivid Pro Discrete Op-Amps
- Proprietary V7 Vivid Pro discrete op-amps.
- Developed through approximately 20 years of Burson op-amp engineering.
- Designed for transparency, dynamic expression and tonal texture.
- Supports op-amp swapping.
🎵 Dedicated IEM Amplification
Deluxe version:
- 2 × TPA6120A2 amplifier chips.
- THD+N: 0.001%.
- Slew rate: 1300V/µs.
Max version:
- Fully discrete dual-mono Class-A IEM amplifier.
- 10W idle power consumption.
- Up to 1W balanced output at 32Ω.
- Dedicated low-noise amplification for sensitive IEMs.
🔇 Advanced Power Supply Technology
- 10 independent Max Current Power Supply modules.
- Silent Power Level 02 modules in Deluxe and Max packages.
- GaN Fusion Core power supply in Max package.
- Fusion Core operates at over 1MHz switching frequency.
- Designed for low-noise, high-current power delivery.
❄️ Cool Case 2 Thermal Management
- Advanced aluminium chassis heat dissipation.
- Fanless cooling architecture.
- Designed to maintain deep Class-A bias and thermal stability.
🔌 Connectivity
Analogue inputs: 2
- 1 × RCA single-ended stereo input.
- 1 × XLR balanced stereo input.
Additional control input: 1
- 1 × 3.5mm 12V trigger input.
Headphone outputs: 3
- 1 × XLR balanced headphone output.
- 1 × 4.4mm balanced headphone output.
- 1 × 6.35mm single-ended headphone output.
Dedicated IEM amplification output:
- 1 × dedicated IEM output stage.
- Deluxe: TPA6120A2 implementation.
- Max: Discrete Class-A implementation.
- No analogue preamplifier or line-level outputs.
- No conventional volume control.
The dedicated IEM amplification is an internal amplifier stage, not an additional physical output socket. The three headphone sockets are the physical outputs.
📊 Technical Specifications
- Amplifier topology: Pure Class A.
- Architecture: Symmetrical dual mono.
- Output transistors: MOSFET.
- Balanced output: 12W @ 32Ω.
- Single-ended output: 6W @ 32Ω.
- THD: Less than 0.0005%.
- Frequency response: 0–48kHz (±1dB).
- Headphone output impedance: 0.5Ω.
- Damping factor: Greater than 50 @ 32Ω.
- Signal-to-noise ratio: Greater than 105dB (High Gain).
- Input impedance: 22kΩ.
- Dimensions: 265 × 270 × 85mm.
- Weight: Approximately 7kg.
📦 Package Options
Included
Soloist Prime | Accessories including regional power cable
- Deluxe: V7 Vivid Pro op-amps, Silent Power 02, Super Charger 24V/5A and dual-mono TPA6120A2 IEM amplification.
- Max: V7 Vivid Pro op-amps, Silent Power 02, GaN Fusion Core 24V/15A and fully discrete Class-A IEM amplification.

















Reviews
There are no reviews yet.